Maybe it's spring fever, but I decided to start cleaning weird things around the house. After having awful water for so many years, my T-Fal pan covers were completely covered with this sticky yellowish-brown film that I couldn't get rid of no matter how hard I tried. It has always grossed me out.
A couple of years ago I discovered that if I put my gas burner covers in a ziploc bag with a little bit of ammonia and let it sit overnight, all of the cooked on crud wipes right off. So it suddenly occurred to me that perhaps that might work on those covers.
I found a big ziploc, poured about a 1/4 cup of ammonia in it and then put one of the covers inside and let it sit overnight. Yesterday I held my breath, opened the bag and rinsed it off. Every bit of that crud came right off, and that cover looks like brand new. I was completely tickled.
So last night I threw in 2 of the burner covers and 2 more pot covers. I just got done washing those, and now I have the last 2 covers and burner covers in soaking until tomorrow.
Next project, get the damn cloudiness off of my glasses. I just hate them and anytime I need to give someone a glass around here I have to look through all of them to find one decent enough to use.
I had tried the vinegar trick a long time ago without success. I checked out an antique site that said to use Dow bathroom cleaner. Nope. They said to rub with alcohol. Nope. They said to pour ammonia in them and let them soak. Not gonna' do that because with those fumes, Kev will get home tomorrow and find me unconscious. So I grabbed one and threw it in the bag with the other stuff. I'll find out tomorrow if that worked, and if it does, I'll be doing a happy dance everywhere in the house.
Hmmmm....now I'm wondering what would happen if I put a pan in there. The outsides of all of them are cruddy looking with that same sticky film the covers had. That might be my next experiment. I really want to buy a really good set of stainless cookware without non-stick properties, but damn, they are pricey. One more thing to add to my list for when my ship comes in or Kev wins the lottery.
I always see these mani's using that leadlight technique, and I almost always think they're pretty. I didn't really have many sheer polishes so didn't think I'd ever try it. Finally I couldn't take it anymore and broke down and bought the OPI Sheer Tints.
Last weekend I decided to give it a try. Even with all the stamping plates I own, I had a really hard time trying to figure out a design to use. After looking through all of them at least three times, I opted for this one from the MoYou Pro 10 plate.
A couple of years ago I discovered that if I put my gas burner covers in a ziploc bag with a little bit of ammonia and let it sit overnight, all of the cooked on crud wipes right off. So it suddenly occurred to me that perhaps that might work on those covers.
I found a big ziploc, poured about a 1/4 cup of ammonia in it and then put one of the covers inside and let it sit overnight. Yesterday I held my breath, opened the bag and rinsed it off. Every bit of that crud came right off, and that cover looks like brand new. I was completely tickled.
So last night I threw in 2 of the burner covers and 2 more pot covers. I just got done washing those, and now I have the last 2 covers and burner covers in soaking until tomorrow.
Next project, get the damn cloudiness off of my glasses. I just hate them and anytime I need to give someone a glass around here I have to look through all of them to find one decent enough to use.
I had tried the vinegar trick a long time ago without success. I checked out an antique site that said to use Dow bathroom cleaner. Nope. They said to rub with alcohol. Nope. They said to pour ammonia in them and let them soak. Not gonna' do that because with those fumes, Kev will get home tomorrow and find me unconscious. So I grabbed one and threw it in the bag with the other stuff. I'll find out tomorrow if that worked, and if it does, I'll be doing a happy dance everywhere in the house.
Hmmmm....now I'm wondering what would happen if I put a pan in there. The outsides of all of them are cruddy looking with that same sticky film the covers had. That might be my next experiment. I really want to buy a really good set of stainless cookware without non-stick properties, but damn, they are pricey. One more thing to add to my list for when my ship comes in or Kev wins the lottery.
I always see these mani's using that leadlight technique, and I almost always think they're pretty. I didn't really have many sheer polishes so didn't think I'd ever try it. Finally I couldn't take it anymore and broke down and bought the OPI Sheer Tints.
Last weekend I decided to give it a try. Even with all the stamping plates I own, I had a really hard time trying to figure out a design to use. After looking through all of them at least three times, I opted for this one from the MoYou Pro 10 plate.
Evidently I need to find a sheer polish that is actually red. I wanted red. I used all of the OPI Sheer Tints, Be Magentale with Me, Don't Violet Me Down, I'm Never Amberrassed and I Can Teal You Like Me. For the green which you can't really see much of here, I used China Glaze Keepin' it Teal.
I only did my left hand because I really wasn't impressed and really didn't like it much. I took my pics and then took it off. After I put this picture in my blog drafts and looked at it again, I decided I really do like it. Dammit. I hate when that happens.
I don't love it nearly as much as others I've seen, but overall it was pretty fun to do, and I'm sure I'll eventually try it again.
Now I'm going to eat some oatmeal scotchies I made last night and watch Grey's Anatomy. Sounds like a productive day today!
I only did my left hand because I really wasn't impressed and really didn't like it much. I took my pics and then took it off. After I put this picture in my blog drafts and looked at it again, I decided I really do like it. Dammit. I hate when that happens.
I don't love it nearly as much as others I've seen, but overall it was pretty fun to do, and I'm sure I'll eventually try it again.
Now I'm going to eat some oatmeal scotchies I made last night and watch Grey's Anatomy. Sounds like a productive day today!
Not sure if your cloud on your glasses is hard water or just from the other yellow-brown goop you were talking about. But if it's just that white film from hard water, I dealt with that in Arizona. I finally kept everything sparkling but using a combo of 4 different things. I used Lemi-Shine in the large portion of the detergent dispense and Cascade in the small portion, liquid Jet-Dry, and the little Jet-Dry that snap on to your upper rack of the dishwasher. It took all of that to keep the film off of all of my dishes.
ReplyDeleteThe cloudy is from hard water. We got a new water system this past summer so I believe if I can get them clear, it won't be something I'll have to worry about again.
DeleteDiane... what is this leadlight technique that you're talking about...??? and HOW did you do that mani?? I admit, I'm confused! (as always!) haha As for the white cloud on the glasses, If you put them in the dishwasher, I believe it could be literal scratches from food particles and just the water constantly hitting the glass. I have a set of glasses that I put in the dishwasher and they look all cloudy... I have another matching set that we never put in the dishwasher and they are clear and look like new!!
ReplyDeleteSome of the glass issue might be scratches, but it's pretty much from years of dishwasher washing with our horrid water.
DeleteAs for the leadlight, I'm surprised you haven't seen it mentioned anywhere. I stamped the design with black, and then used a dotting tool to color everything in using the sheer colors. Another way people do it is to stamp white over dark and then use sheer polishes to color in the design.
Thanx!! I don't think I have seen it anywhere!!?? I have those tints... I love them!!! Might be something I can do!! :) And yes.... hard water can do that.... Ugh, we have that for sure!!! Hope you get them shiny clean again! :)
ReplyDeleteWell, the ammonia was a bust. You should for sure try the leadlighting. It's pretty fun!
DeleteSee one of your local stores carries the Lemi-Shine. It's basically Citric Acid. That should help.
ReplyDeleteI'll have to look for that.....ammonia didn't touch it.
Delete